Abstract
A homogeneous melting state without any crystalline inclusions was achieved in an arc melt furnace by using a ladle arc-melting-type furnace. Molten alloy for pouring can be melted completely by arc heating just above the mold in a pseudo float melting (PFM) state. We combined a ladle arc-melt-type furnace and the squeeze cast method to produce bulk amorphous alloy sheet with a single amorphous phase structure, thereby successfully producing crystalline inclusion-free Zr 50Cu30Ni10Al10 bulk amorphous alloy sheets. The tensile strengths of the Zr50Cu30Ni10Al10 bulk amorphous alloys exceeded 1800 MPa, and the bending deflection of the alloys was improved by a factor of 10 using the PFM process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.