Proppant transport in rough fractures of unconventional oil and gas reservoirs

Abstract

A method to generate fractures with rough surfaces was proposed according to the fractal interpolation theory. Considering the particle-particle, particle-wall and particle-fluid interactions, a proppant-fracturing fluid two-phase flow model based on computational fluid dynamics (CFD)-discrete element method (DEM) coupling was established. The simulation results were verified with relevant experimental data. It was proved that the model can match transport and accumulation of proppants in rough fractures well. Several cases of numerical simulations were carried out. Compared with proppant transport in smooth flat fractures, bulge on the rough fracture wall affects transport and settlement of proppants significantly in proppant transportation in rough fractures. The higher the roughness of fracture, the faster the settlement of proppant particles near the fracture inlet, the shorter the horizontal transport distance, and the more likely to accumulate near the fracture inlet to form a sand plugging in a short time. Fracture wall roughness could control the migration path of fracturing fluid to a certain degree and change the path of proppant filling in the fracture. On the one hand, the rough wall bulge raises the proppant transport path and the proppants flow out of the fracture, reducing the proppant sweep area. On the other hand, the sand-carrying fluid is prone to change flow direction near the contact point of bulge, thus expanding the proppant sweep area.