Proppant Migration Law Considering Complex Fractures

Abstract

The placement of proppant within fractures is critical to the effectiveness of hydraulic fracturing. To elucidate the migration and placement patterns of proppant within multi-branched fractures during hydraulic fracturing, we conducted simulation experiments under both single-fracture and multi-branched-fracture conditions, varying injection rates and proppant sizes. The results of the research indicate that increasing the injection rate effectively increases the magnitude of vortex formation at the leading edge of sandbars and the drag forces acting on the proppant particles, resulting in increased particle migration distances. However, effective proppant packing near the wellbore entrance is not achieved at higher injection rates, leaving the fractures susceptible to closure under in situ stress, thereby reducing overall fracture conductivity. In addition, increasing the proppant size results in higher settling velocities and weakens the vortex’s ability to entrain the proppant particles. This results in shorter proppant placement distances, and the proppant cannot effectively reach the distant branched fractures. In addition, the diversionary effect of the branched fractures gradually reduces the flow rate in the distant branches, resulting in poorer proppant placement efficiency. Based on these findings, we recommend an approach that initially increases injection rates while reducing proppant size to ensure proppant placement in distant wellbore fractures and branched fracture networks. Subsequently, larger proppants can be used to effectively fill fractures close to the wellbore.