Proposal of Evaluation Method for Crack Propagation Behaviors of Second-Generation Acrylic Adhesives under Mode I Static Loading.

Abstract

Second-generation acrylic (SGA) adhesives, possessing high strength and toughness, are applicable in automotive body structures. Few studies have considered the fracture toughness of the SGA adhesives. This study entailed a comparative analysis of the critical separation energy for all three SGA adhesives and an examination of the mechanical properties of the bond. Loading-unloading test was performed to evaluate crack propagation behaviors. In the loading-unloading test of the SGA adhesive with high ductility, plastic deformation was observed in the steel adherends; the arrest load dominated the propagation and non-propagation of crack for adhesive. The critical separation energy of this adhesive was assessed by the arrest load. In contrast, for the SGA adhesives with high tensile strength and modulus, the load suddenly decreased during loading, and the steel adherend was not plastically deformed. The critical separation energies of these adhesives were assessed using the inelastic load. The critical separation energies for all the adhesives were higher for thicker adhesive. Particularly, the critical separation energies of the highly ductile adhesives were more affected by the adhesive thickness than highly strength adhesives. The critical separation energy from the analysis using the cohesive zone model agreed with the experimental results.