Abstract

A new methodology based on a novel combination of a high-resolution specular x-ray reflectivity and small-angle neutron scattering has been developed to evaluate the structural properties of low-dielectric-constant porous silica thin films about one micrometer thick supported on silicon wafer substrates. To complement these results, film composition was determined by high-energy ion scattering techniques. For the example thin film presented here, the overall film density was found to be (0.55±0.01) g/cm3 with a pore wall density of (1.16±0.05) g/cm3 and a porosity of (53±1)%. The characteristic average dimension for the pores was found to be (65±1) Å. It was determined that (22.1±0.5)% of the pores had connective paths to the free surface. The mass fraction of water absorption was (3.0±0.5)% and the coefficient of thermal expansion was (60±20)×10−6/°C from room temperature to 175 °C. Lastly, model fitting of the specular x-ray reflectivity data indicated the presence of a thin surface layer with an increased electron density compared to the bulk of the film as well as an interfacial layer with a reduced electron density.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call