Quadrupole mode plasmon resonance enabled dual-band metamaterial for refractive index sensing application

Abstract

In this paper, design and fabrication of a dual-band near-zero index metamaterial (MTM) structure using copper on an epoxy resin fiber (FR-4) dielectric substrate is reported for refractive index sensing applications. The primary objective is to achieve dual-band operation spanning a 1–15 GHz frequency range, with a specific focus on achieving a broad bandwidth in the C-band. The resonance of the MTM structure was ascribed to the coupling of plane electromagnetic waves with surface plasmon polaritons on the structure, resulting in a quadrupole plasmon resonance mode. Furthermore, transmission characteristics of the fabricated MTM structure were experimentally measured and found to align closely with the simulated results obtained through the finite element method in COMSOL Multiphysics. The designed MTM structure demonstrates negative and near-zero permittivity at resonance frequencies, enabling left-handed and near-zero index behavior in dual microwave frequency bands. Under room temperature conditions, the MTM sensor exhibited sensitivities of 1 GHz/RIU and 3 GHz/RIU at resonance frequencies of 2.7 and 7.3 GHz, respectively. Consequently, the MTM structure exhibits significant potential for diverse applications, serving as a valuable component in sensors, detectors, and optoelectronic devices operating in the GHz region.