Properties of concrete incorporating microwave treated coarse aggregate: An experimental study

Abstract

Using microwave heating technology to assist concrete recycling have great potential for improve the quality of recycled concrete aggregate. Unfortunately, there are few studies explored on the properties of concrete incorporating microwave treated coarse aggregates. This study aims to investigate the performance of coarse aggregate after microwave treatment and to evaluate the properties of the resulting concrete incorporated microwave treatment aggregate. The water absorption and crushing value tests were carried out to study the effect of microwave heating treatment on the physical properties of coarse aggregates. Concrete incorporated aggregate with various microwave heating parameters was fabricated and tested. The results indicated that physical performance of microwave treated aggregate was within the range of specification requirement and water absorption and crushing value of coarse aggregate heated under low microwave power levels (2–3 kW) is very closed to the untreated samples, while coarse aggregates treated with high power levels showed a significant increase. It was also observed that concrete made out of low microwave power levels heated aggregates are able to achieve strength on par with natural coarse aggregate concrete. In addition, in case of similar strength, the elastic modulus of microwave treated aggregate concrete is similar to natural aggregate concrete. These results indicate that using low microwave power levels to assisted aggregates recycling can reduce the damage to coarse aggregates to some extent, which provide a further understanding for the application of microwave-assisted aggregates recycling.