Properties of atomic layer deposited dielectrics for AlGaN/GaN device passivation

Abstract

In order to minimize ac–dc dispersion, reduce gate leakage and maximize ac transconductance, there is a critical need to identify optimal interfaces, low-k passivation dielectrics and high-k gate dielectrics. In this paper, an investigation of different atomic layer deposited (ALD) passivation dielectrics on AlGaN/GaN-based hetero-junction field effect transistors (HFETs) was performed. Angle-resolved x-ray photoelectron spectroscopy revealed that HCl/HF and NH4OH cleans resulted in a reduction of native oxide and carbon levels at the GaN surface. The role of high temperature anneals, following the ALD, on the effectiveness of passivation was also explored. Gate-lag measurements on HFETs passivated with a thin ALD high-k Al2O3 or HfAlO layer capped with a thick plasma enhanced chemical vapor deposited (PECVD) low-k SiO2 layer, annealed at 600–700 °C, were found to be as good as or even better than those with conventional PECVD silicon nitride passivation. Further, it was observed that different passivation dielectric stacks required different anneal temperatures for improved gate-lag behavior compared to the as-deposited case.