Progressive collapse of RC flat slab substructures with unbonded posttensioning strands after the loss of an exterior column

Abstract

Reinforced Concrete (RC) flat slab structures are mainly composed of load-bearing columns and RC slabs, which are vulnerable to collapse once one or several local load-bearing columns fail due to accidental loads such as terrorist bomb attack or vehicle collision. To investigate the progressive collapse performance of flat slab structures after the loss of an exterior column, static collapse tests were conducted on three 1 × 2 bay RC flat slab substructures. Effect of prestress and layout of the unbonded posttensioning strands (UPSs) on the progressive collapse of flat slab structures was discussed. Experimental results showed that punching shear failure (PSF) foremost occurred at the slab-column connection (SCC) of the failed exterior column during collapse, and then successively occurred at the SCCs close to the corner column and the exterior column adjacent to the failed column. Primary cracks on the top slab surfaces around the failed exterior column generally presented arc-shaped distribution; while primary cracks on the bottom slab surfaces radially propagated from the failed exterior column. Comparing with the flat slab substructure without UPSs in the slabs, the load-bearing capacity of the substructures with UPSs in the slabs significantly improved. Flexural action was the fundamental collapse resistance mechanism in the initial collapse stage, and tensile membrane action gradually formed during collapse. The flexural action, the tensile membrane action, as well as the post-punching behaviors of the slabs resisted the collapse load together before the final collapse occurred. Most of the load applied on the failed exterior column mainly transmitted along the shorter slab bay under the exterior-column-removal scenario. Arranging posttensioning strands in the slabs contributed to reducing vertical deformation of the slabs. The UPSs in the column strip passing through the failed column played a more important role in resisting collapse load than those arranged in the middle strip. The residual flat slab substructures still possessed satisfactory load-carrying capacity even if PSF occurred in one or several SCCs.