Abstract

<p indent="0mm">In the 5G era, the effective thermal management has become more demanding due to the ever-rising integration of electronic devices. High thermal conductivity materials play a crucial role in the field of thermal management, for example, thermal interface materials (TIMs) are used to fill the gap between the electronic chip and the heat sink to improve thermal transfer. In recent years, polymers have become a popular choice for thermal conductive materials because of their light, economical and excellent insulation and processability. To improve the thermal conductivity of materials, inorganic fillers with high thermal conductivity are generally composited with polymers. With the merits of high thermal conductivity, desirable chemical stability, carbon nanotubes (CNTs) are considered to have broad application potential in thermal conductive composites. Simple composition methods failed to increase thermal conductivity of composite materials to expected levels due to the large interfacial thermal resistance between CNTs and polymers and the disorderly distribution of CNTs in polymers. Therefore, reasonable design of polymer composites filled with CNTs is the key to achieving high thermal conductivity. This review mainly introduces the application of CNTs in thermal conductive polymer composites. Based on the existing theoretical research on thermal conductivity of composites and the application of molecular dynamics, more feasible strategies for improving the thermal conductivity of polymer composites filled with CNTs have been proposed. The approaches that improve the thermal conductivity of composites are mainly introduced from three aspects. (1) The intrinsic thermal conductivity of CNTs is an important factor affecting the thermal conductivity of polymer-based composites. CNTs and their macroscopic bulk materials both have excellent thermal conductivity. However, the thermal conductivity test results of the macroscopic materials of CNTs (such as CNTs fibers, arrays, and films) showed that the thermal conductivity of the macroscopic materials of CNTs was much smaller than that of single CNTs due to impurities, defects and inter-tube contact thermal resistance. Studies have shown that purification of CNTs and reduction of intertubular contact thermal resistance can improve the intrinsic thermal conductivity of CNTs. (2) From a microscopic perspective, phonons, the quantized energy of lattice vibration, are the main mechanism of heat conduction in most carbon fillers and polymers. Phonon scattering occurs in the process of phonon transfer, including the scattering between phonons and the scattering at the interface caused by defects and impurities, resulting in thermal resistance. The bonding strength of fillers and polymer interfaces are the crucial factors affecting the transmission of phonons. Hence, the thermal conductivity of composites could be effectively enhanced by surface treatment of CNTs, including covalent functionalization and non-covalent functionalization. Studies have shown that the functionalization can enhance the interfacial interaction between CNTs and polymers, while improving the dispersion of CNTs in polymers. (3) According to the thermal conduction network theory, the key to improving the thermal conductivity is whether the fillers can form a large number of continuous thermal conduction paths in the polymers and maintain a stable existence. However, high CNTs content usually affects the comprehensive properties of composites. To solve this problem, the arrangement and distribution of CNTs in the polymer should be improved to construct more heat conduction pathways, which can achieve high thermal conductivity at a low filling content. Here we introduce some effective methods, including the synergy effect, field orientation and the construction of 3D network structures. In this review, the characteristics and improvement effects of different technical approaches are summarized, which provides a reference for the research and application of CNT-filled polymer-based composites with high thermal conductivity. Finally, the future development prospects of carbon nanomaterial-filled polymer composites are discussed from perspectives of theoretical research, experimental design and engineering application.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.