Abstract
Water breakthrough and the flow of water towards the perforations of a producing well increase production operation costs and influence overall recovery efficiency. To control water production, a downhole water sink can be used in which a well is completed in both oil and water zones. Water is produced from an interval in water zone, which can result in the same pressure drop below water oil contact (WOC) as the pressure drop created by oil or gas production. This system can reduce water production through oil zone perforations. Water produced from water zone perforations can then be injected in deeper aquifers intervals. This technology can also be implemented in horizontal and multi-lateral wells to further increase hydrocarbon recovery with fewer water problems. This study examines the use of horizontal downhole water sink technology to increase oil recovery. Numerical simulation is performed to optimise oil production and water control in a multi-layered oil reservoir, by optimising the direction of drilling and the downhole water sink method. Different scenarios of drilling direction and horizontal down-hole water sink method are examined to identify the option that provides maximum oil recovery. The simulation results showed that drilling horizontal wells in a north–south direction resulted in higher well productivity, and that wells with significantly more water production problems can be controlled using a horizontal downhole water sink.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call