Abstract
The study provides technoeconomic evaluations of advanced MEA-based Post-Combustion CO2 Capture (PCCC) process configurations applied to a 750 MW Combined Cycle Gas Turbine (CCGT) power plant. Rigorous rate-based model of the PCCC process developed in Aspen Plus was validated and then used to study synergistic effects of combining three process configurations in one flowsheet using energy and levelized cost of capture as key performance indicators (KPIs). The results of the energy and economic analysis elucidate that Absorber Inter Cooling (AIC) + Rich Solvent Split (RSS) + Lean Vapor Compression (LVC) is the optimal combination of MEA-based PCCC process as it provided minimum regeneration energy (2.80 GJ/tCO2) and levelized capture cost (72.7 $/tCO2) representing an overall energy and cost savings of 6.25% and 8.95%, respectively. The study demonstrates that the usage of single KPI such as energy savings can provide misleading results. For example, combination of AIC + RSS + Inter Heated Stripper (IHS) provided maximum equivalent energy savings (3.50%), however, it did not result in highest cost savings due to high capital and operating costs of additional heater and pump. Overall, the study underlines the potential of advanced mature technologies on energy and cost reductions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.