Abstract
To provide a theoretical basis for a suitable process to extract gold from refractory gold concentrates, process mineralogy on the acid leaching residue of gold calcine was studied by chemical composition, X-ray diffraction, scanning electron microscopy-energy spectrum, and mineral dissociation analysis. The results showed that the acid leaching residue contained Au 68.22 g/t, Ag 92.71 g/t, Fe 0.44%, As 0.10%, and S 0.55%. Gold and silver minerals existed as native gold, argentite, and proustite. Quartz, the main gangue mineral, accounted for 78.33wt/%. The dissociation degree analysis showed that the proportions of monomer and exposed gold in acid leaching residue were 96.66wt%. The cyanidation results showed that the cyanide gold leaching rate of acid leaching residues was close to 100wt%. However, the maximum cyanide gold leaching rate of gold calcine was only 85.31wt%. This suggests that acid leaching can increase the gold dissolution rate in the cyanide process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have