Abstract
Continuous advancements in chemical mechanical planarization (CMP) process, such as new polishing pads, slurry materials, and abrasive particles necessitate optimization of the key process input parameters for maximum material removal rate (MRR) and/or minimum within wafer non-uniformity (WIWNU) using sparse experimental results. In this investigation a methodology is proposed for developing process models and optimization of input parameters (both main and interaction parameters) for maximum MRR and minimum WIWNU. This approach will be equally applicable for polishing other materials, such as copper, dielectrics and low-k materials. Complex relationships exist between several machine-specific and material-specific input parameters and the output performance variables, chiefly MRR and WIWNU. However, only a few of the input parameters are changed on a regular basis. Hence, only those subsets of relationships need to be considered for optimizing the CMP process. In this investigation, CMP process was characterized for polishing a thin layer of silicon dioxide on top of a silicon wafer. Statistical analysis of the experimental data was performed to obtain the order of significance of the input variables (machine and material parameters and their interactions). Both linear and logarithmic regression models were developed and used to determine optimum process conditions for maximizing MRR and minimizing WIWNU. While the main input parameters were responsible for maximum MRR, interaction parameters were found to be responsible for minimizing WIWNU. This may vary for different materials and polishing environments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have