Abstract
Metal FDM technology overcomes the problems of high cost, high energy consumption and high material requirements of traditional metal additive manufacturing by combining FDM and powder metallurgy and realizes the low-cost manufacturing of complex metal parts. In this work, 15-5PH stainless steel granules with a powder content of 90% and suitable for metal FDM were developed. The flowability and formability of the feedstock were investigated and the parts were printed. A two-step (solvent and thermal) debinding process is used to remove the binder from the green part. After being kept at 75 °C in cyclohexane for 24 h, the solvent debinding rate reached 98.7%. Following thermal debinding, the material's weight decreased by slightly more than 10%. Sintering was conducted at 1300 °C, 1375 °C and 1390 °C in a hydrogen atmosphere. The results show that the shrinkage of the sintered components in the X-Y-Z direction remains quite consistent, with values ranging from 13.26% to 19.58% between 1300 °C and 1390 °C. After sintering at 1390 °C, the material exhibited a relative density of 95.83%, a hardness of 101.63 HRBW and a remarkable tensile strength of 770 MPa. This work realizes the production of metal parts using 15-5PH granules' extrusion additive manufacturing, providing a method for the low-cost preparation of metal parts. And it provides a useful reference for the debinding and sintering process settings of metal FDM. In addition, it also enriches the selection range of materials for metal FDM.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
