Pre-tension design and research of cable net structure for space modular deployable antenna

Abstract

Modular deployable antennas represent an ideal structural form for the development of large-aperture antennas because of their flexibility, adaptability, and high versatility. To enhance the surface accuracy of the antenna after deployment, a comprehensive pre-tension design method that considers truss deformation and tension uniformity is proposed. First, the configuration design of the antenna cable net is constructed, and the mathematical models for cable length under surface accuracy requirements and boundary nodes are established considering catenary effects. Second, the distribution patterns of cable net structure nodes and segments are analyzed, leading to the creation of node coordinate matrices and cable net connection matrices. A basic model for cable net pre-tension design is developed based on the fundamental principles of force density. Furthermore, a multi-objective optimization of cable net pre-tension is performed using a genetic algorithm, considering truss structure deformation and tension uniformity as dual factors. Finally, the developed model is applied to design a single-module cable net structure, and numerical simulation is used for validation. Research results show that the overall surface form error is 0.32 mm, and the maximum tension ratio of cable net on the front cable net surface is 1.54, whereas the maximum tension ratio of tension ties is 2.28, thereby meeting the design requirements. Numerical simulation shows that the maximum deformation of the cable net structure is 0.16 mm, validating the correctness of the model. This research can provide valuable insights and references for the pre-tension design and research of cable net structures in other antennas.