Abstract
Abstract The pressurizer system of pressurized water reactor (PWR) maintains the reactor coolant system pressure during steady-state operation and limits pressure changes during transients. The in/out surge transients will cause pressure variations and they are controlled by either the spray system or the heater system. The spray system is actuated when the pressure exceeds a preset value. The heater system is initiated when the pressure falls below a preset value. The fundamental understanding and a reliable modeling of the pressurizer system behavior under steady state and transient conditions are needed to simulate overall nuclear power plant behavior. In the present study, an algorithm using Python 3.7 is developed to represent the dynamic behavior of the pressurizer system under steady-state and during in/out surge transients. Moreover, RELAP5 code is used to simulate the pressurizer system during the prescribed transients. The analysis and assessment results demonstrate satisfactory control performance during the in/out surge transients that guarantee the safety of PWR during operation. Also, the comparison between Python algorithm and RELAP5 model illustrates the capability and effectiveness of the Python algorithm for dynamic simulation and control.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call