Abstract
Prototype pressure sensor was fabricated using piezoresistive effect of boron-doped diamond. Undoped and boron-doped polycrystalline diamonds were deposited on Si substrate using hot filament chemical vapor deposition (CVD) method. The boron-doped diamond was deposited on an isolation layer of the undoped diamond film. Selective diamond deposition was carried out by metal mask, and 30-μm width patterning of the diamond was possible. In order to improve a sensitivity of the sensor, the diaphragm thickness and boron doping depth were varied from 62 to 5 μm and 2 to 0.5 μm, respectively. The sensors were evaluated in the ranges from room temperature to 250 °C and from 0 to 0.07 M Pa of applied pressure.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
