Abstract
The piezoelectric energy generation properties of transparent flexible devices (TFD) based on PbZr0.52Ti0.48O3 (PZT) films, which were fabricated by laser lift-off (LLO) process, were studied for a piezoelectric energy harvester. Through the introduction of indium-tin-oxide (ITO) and polyethylene terephthalate (PET) substrates, TFDs were implemented, respectively. The TFDs based on PZT films generated an AC-type output signal and output power of 8.4nW/cm2, at periodically bending and releasing motion. In addition, inverted output signals were observed when the manufactured TFDs were connected to the measuring equipment in reverse and were bended to the reverse direction, demonstrating that the generating signals originated from the piezoelectric effect of TFDs. The experimental results clearly showed that the TFDs based PZT film have potential for use in next generation of electronic devices applications such as flexible devices, transparent electronics, and energy harvester.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
