Preparation of resistant starch from starch–guar gum extrudates and their properties

Abstract

Mixtures of starch, guar gum and citric acid were extruded at a temperature of 150 °C and screw speed of 180 rpm. Properties of the extrudates such as bulk density, expansion ratio, apparent viscosity and resistant starch content were measured with different concentrations of guar gum. Extrusion with citric acid influenced the physical properties and resistant starch content of the extrudate. Expansion ratios were lower for samples extruded with citric acid, and decreased as starch–gum concentration increased. The apparent viscosity of the extrudate increased with increasing guar gum concentration; however, citric acid at 2.0% concentration was found to lower the viscosity of the extrudate. Resistant starch content increased from 6.23% for extruded starch only to 14.21% for starch–gum extrudate, and further enhanced to 16.19% with the addition of 2.0% citric acid to the starch–gum extrudate. Resistant starch increased with increase of gum concentration and decreased with increase of starch–gum concentration from 7.5% to 12.5%.