Abstract
Polymer membranes with fixed pore size or narrow pore size distribution can be used for special separation. However, polymer membranes prepared by conventional method usually have wide pore size distribution and the pore size is hard to control. Here we prepared a porous polymer membrane with uniform pore size via spraying a blend of polystyrene (PS) and polyethylene oxide (PEO) on a filtration paper. Dissolving the water-soluble component (PEO) forms the pore and varying the ratios of PEO in the blend controls the pore size. The pore size and size distribution are also affected by processing parameters, such as the flow rate of solution and carrier gas, and gap length. The morphologies of the membrane are observed using scanning electron microscopy (SEM). The novel polymer membrane with controllable and uniform pore size will be used for the separation of solutes with predictable sizes.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.