Preparation of PbZrxTi1−xO3 Films on Si Substrates Using SrTiO3 Buffer Layers

Abstract

ABSTRACTWe report the preparation of PbZrxTi1−xO3 (PZT) films on Si substrates with a SrTiO3 (STO) buffer layer. STO buffer layers and PZT films were formed on Si substrates by the electron-beam assisted vacuum evaporation technique and sol-gel technique, respectively. By evaporating a thin (8nm) metal Sr layer prior to the STO deposition, which deoxidizes the SiO2 layer at the Si surface, (100)- and (111)-oriented STO thin films can be grown on Si(100) and (111) substrates, respectively. It is shown that a strongly (100)-oriented PZT film is grown on STO(100)/Si(100), whereas a strongly (111)-oriented PZT film is obtained on STO(111)/Si(111). It is also found that the STO buffer layer remains intact even after the PZT deposition. Secondary ion mass spectrometry (SIMS) analysis showed that the STO barrier layer was effective in preventing diffusion of Pb into the Si substrate.