Abstract
A high-performance, H2-permselective silica membrane derived from hexyltrimethoxysilane (HTMOS) was developed for application in the thermochemical water-splitting iodine–sulfur process. Silica membranes, referred to here as HTMOS membranes, were prepared via counter-diffusion chemical vapor deposition on γ-alumina-coated α-alumina support tubes with outer diameters of 10 mm. Special attention was devoted to obtain high H2/HI selectivity, high H2 permeance, and good stability in the presence of corrosive HI gas. The effects of the deposition conditions, temperature, and period were investigated. The HTMOS membrane prepared at 450 °C for 5 min exhibited high H2/HI selectivity (>175) with H2 permeance on the order of 10−7 mol Pa−1 m−2 s−1. On the basis of stability experiments, it was found that the HTMOS membrane was stable upon HI exposure at a temperature of 400 °C for 11 h.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.