Preparation of aluminum oxide coating on carbon/carbon composites using a new detonation sprayer

Abstract

AbstractA new multi‐chamber cumulative detonation sprayer (MCDS) was applied to fabricate an aluminum oxide coating on carbon/carbon composites. MCDS provides heating and acceleration of ceramic micropowders by means of combustible gas mixture detonation products with a frequency of 20 Hz and above. The ceramic aluminum oxide particle kinetic energy ensures the destruction of the weakened areas on the carbon‐carbon composite material surface and the incorporation of these particles into the surface layer. The following powder particles decelerate on the already fixed particles and form a ceramic coating. The formed aluminum oxide coating is characterized by high hardness and low porosity (<1%). MCDS provides the formation of a high‐quality ceramic layer, which can also serve as the basis for the formation of protective heat‐resistant coatings.