Preparation of a Novel Copper–Cobalt Composite Catalyst and Study on Performance Degradation of Methyl Orange

Abstract

A novel Co–Cu composite heterogeneous Fenton-like catalyst was prepared by using a modified hydrothermal method for the degradation of methyl orange solution. The catalyst was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), X-ray powder diffraction (XRD) and a Fourier transform infrared spectrometer (FT-IR), which confirmed that the catalyst contained Co(OH)2, Cu2O, and an exhibition of a hexagonal crystalline structure with sizes within the range of 0.5–5 μm. The influential factors were researched with the use of univariate analysis and the results showed that: the catalyst has better catalytic properties in the pH range of 2–10 and there was an optimum value of the dosage of the catalyst; the greater the dosage of the catalyst, the faster the COD degradation rate achieves its maximum value; the COD degradation rate increases with a higher reaction temperature. When the pH is 7, the dosage of the catalyst is 0.3 g/L, the dosage of hydrogen peroxide is 50 mL/L, and the reaction temperature is 313 K. The COD degradation rate reached 94% after 50 min of treatment, which proved that the catalyst exhibited high catalysis in a Fenton-like process. Furthermore, reuse of the catalyst and the degradation mechanism of methyl orange were also researched.