Abstract
ABSTRACT The unsaturated zinc carboxylate/Ethylene-Propylene-Diene Monomer (EPDM) composites were prepared by mechanical blending. The effects of hydroxy (2-methylprop-2-enoato-O)zinc (ZMMA) and zinc dimethacrylate (ZDMA) on the hydrophobicity, mechanical properties, ageing resistance, and electrical properties of the composites were studied. The results show that the mechanical properties, crosslinking rate, crosslinking density, and oil resistance of the composite are significantly improved with the increase of ZMMA and ZDMA content. The crosslinking density of EPDM filled with 15 phr of ZDMA composite material is 3.22 × 10−3 mol/cm3, compared with the samples without ZDMA filling, the improvement was 175.2%, and the tensile strength reaches 16.9 MPa, which increases by 33.6%. The addition of a small amount of unsaturated carboxylate has a positive effect on the electrical properties of EPDM matrix composites. The volume resistivity of the EPDM filled with 5 phr of ZDMA is 16.2 × 1013 Ω·m, an increase of 36.1%.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
