Abstract
ABSTRACTA serial of addition‐curable hybrid resins for resin matrix of advanced composites are prepared by thermal prepolymerization between acetylene‐functional benzoxazine(BZ) and polyvinylsilazane(PSN) with various weight ratios. Processing capability of BZ‐PSN resin is investigated by measuring viscosity. Cure behavior is investigated by differential scanning calorimetry (DSC) and Fourier transform infrared (FT‐IR) spectra. Thermal property of cured BZ‐PSN resin is investigated by Thermogravimetric analysis (TGA) and Dynamic mechanical analysis (DMA). BZ‐PSN resin shows a low viscosity of 40–180 mPa·s between 60 and 90°C, and maintains the low viscosity for 6 h, indicating that the resin is suitable for resin transfer molding (RTM) process to fabricate composites. DSC results show that BZ‐PSN resin can be cured completely at about 250°C without adding any other curing additives. FT‐IR shows the reaction between BZ and PSN take place. TGA shows that thermal stability of cured BZ‐PSN resin is increased with the content of polyvinylsilazane increasing both in nitrogen and in air. DMA shows cured hybrid resins have excellent thermal properties. The excellent processability and thermal properties suggest that BZ‐PSN resin is a promising candidate for resin matrix of advanced composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3794–3799, 2013
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.