Abstract
A self-foaming alkali-activated lightweight material was prepared by the pretreatment of municipal solid waste incineration bottom ash (BA). The low weight could be achieved without adding a foaming agent by using the low-density and self-foaming expansion characteristics of BA in combination with a strong alkali. The effects of BA, liquid sodium silicate (LSS), and calcium hydroxide (CH) on dry and wet densities, as well as water absorption, are discussed. The results show that increasing the BA content can significantly improve the foaming effect and reduce the dry and wet densities of specimens. However, it also leads to a sudden decrease in compressive strength and a significant increase in water absorption. LSS and CH can significantly improve the ability to seal bubbles by accelerating condensation, and they further reduce dry and wet densities without significantly improving water absorption. It is most effective at BA, LSS, and CH contents of 60, 20, and 2%, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
