Abstract
ABSTRACTThe long‐chain functionalized graphene nanoplatelets (FGN) were functionalized by isophorone diisocyanate and then octadecylamine, the graphene functionalized/waterborne polyurethane (WPU) composites were prepared by solution mixture. The results showed that the FGN achieved good dispersion with exfoliated and intercalated nanostructure and strong interfacial adhesion with WPU, which made the nano–composites have a significant enhancement of thermal stability and mechanical properties at low FGN loadings. With 1.5% of FGN added, the tensile strength of the composites reached the maximum of 17 MPa, which improved by 41.6%, the water absorption of the composites is only 6.7%. With the incorporation of 2 wt % FGN, and the static contact angle of the composites reached to about 120°, showing the high hydrophobicity. At the same time, the volume resistivity of the composites was changed from 2.34 × 1012 Ω·cm to 3.77 × 109 Ω·cm. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42005.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.