Abstract
A red-emitting Y 2(WO 4) 3: Eu 3+ phosphor (orthorhombic high temperature phase, anhydride) is prepared by two different methods: the firing of mixtures of constituent oxides and that of precipitates from aqueous solutions. After optimizing preparation conditions, the cathodoluminescence brightness reaches 56% that of Y 2O 2S: Eu 3+, a commercial red phosphor for color TV. Formation of a high temperature phase below the reported transition temperature is noted in the fired precipitates. This phase occurrence is shown to depend on the treatment of the precipitates to be fired. Reflection difference measurement of Eu-doped and undoped samples assigns an excitation band of about 245 nm to the Eu-O charge transfer band. Different by-products in the two preparation methods are identified by measuring emission spectra under selective excitation. Reversible hydration-dehydration of the phosphor is demonstrated by successively measuring photoluminescence first in vacuum and then in air at various temperatures. No deterioration of luminescence efficiency is observed after repeating this reversible structural change.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have