Preparation and comparative study of eco-friendly anticorrosion inhibitors based on aliphatic and aromatic compounds for electron beam curable steel coatings

Abstract

PurposeIn this paper, two promising corrosion inhibitors based on natural and eco-friendly materials such as peanut fatty acids (PFA) were prepared and challenged with a common efficient commercial inhibitor. Two amino derivatives based on aliphatic and aromatic compounds such as 2-amino-2-methyl-1-propanol (AMP) and 2-amino-2-phenyl-1-propanol (APP), respectively, were used and reacted with PFA under controlled conditions to produce the corrosion inhibitors. The prepared inhibitors, namely, PFA-AMP (inhІ) and PFA-APP (inhІІ), were confirmed and characterized by Fourier transfer infrared spectroscopy, acid value determination and viscosity measurements.Design/methodology/approachFirst, different coating formulations free from any inhibitors were prepared and irradiated under different doses of electron beam source to select the best dose. Several concentrations of synthesized anticorrosion materials were then added to coating formulations to estimate them as anticorrosion materials for mild steel panels. Then, all formulations were coated and polymerized at a dose of 10 kGy. The corrosion tests, weight loss and water uptake were studied for all films after immersion in 3.5% sodium chloride. Moreover, the chemical and physico-mechanical properties were determined for all films.FindingsThe results exhibited that the different concentrations of two inhibitors did not show any significant change on the different properties of all films, and the best concentration, which gives the better protection for steel panels, was to be 1.0 g for two inhibitors.Originality/valueIt was found that the protection efficiency of the inhІ is better and higher than that of the inhІІ and also of the commercial inhibitor with the following order: inhІ > commercial inhibitor > inhІІ.