Abstract
PurposeCorrosion thinning reduces the effective cross-sectional areas of steel structures and degrades their mechanical properties. This study aims to investigate the relationship between the corrosion thinning of carbon steel for transmission towers and the degradation of its mechanical properties.Design/methodology/approachA macroscopic finite element model of a transmission tower was established and then combined with the corrosion thinning and mechanical properties of Q355 steel in different test periods measured in neutral salt spray, SO2 atmosphere and wet heat environments to conduct a finite element simulation of a transmission tower with different corrosion thinning of Q355 steel.FindingsWhen the residual thickness of the tower leg angle was reduced to 4.03 mm, the maximum stress solved in the simulation exceeded the yield strength, with the tower already at risk of collapse owing to corrosion failure under extreme conditions of basic wind speed.Originality/valueThis study innovatively utilises transmission tower finite element models and experimental data from mechanical degradation experiments to quantify the relationship between corrosion thinning and the mechanical properties of Q355 steel, ensuring the effective assessment of the mechanical properties of corroded transmission towers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
