Abstract
In this work, the effect of addition of MIL-101(Cr) metal–organic framework (MOF) and poly(vinylidene fluoride) (PVDF) on physicochemical, morphological and CO2/CH4 separation properties of Matrimid was investigated. MIL-101(Cr) micron-sized particles were synthesized and dispersed as filler in Matrimid/PVDF blended matrix so that a mixed matrix membrane (MMM) was formed. X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer-Emmett-Teller (BET) analysis were used to characterize the MIL-101(Cr) particles. The Matrimid/PVDF blend membranes were investigated by optical microscopy (OM), differential scanning calorimetry (DSC) and Fourier transform infrared-attenuated total reflectance (FTIR-ATR) spectrophotometry. SEM images were employed to characterize the morphology of membranes. Single-gas permeability measurements for prepared membranes were performed and the results showed improvement in gas permeability of fabricated membranes in comparison with the neat Matrimid membrane. The best performance of blend membrane was obtained with 3 wt% of PVDF, leading to increase 29% and 23% in CO2 permeability and CO2/CH4 selectivity, respectively, as compared to the pristine Matrimid. Furthermore, the gas permeability and CO2/CH4 selectivity were improved simultaneously for Matrimid/PVDF/MIL-101 membrane. The CO2 permeability in this membrane increased 102% and 58%, and the ideal selectivity increased 77% and 45% as compared to the neat Matrimid and Matrimid/PVDF(97/3) membranes, respectively.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call