Abstract
This paper reports the preparation, evaluation, and comparison of alkaline and acidic heterogeneous carbon-based catalysts in the transesterification of safflower oil with methanol to obtain biodiesel. These catalysts were obtained from the pyrolysis of flamboyant pods and their functionalization and activation with potassium hydroxide, citric acid, tartaric acid, sulfuric acid, and calcium nitrate. Different routes for the preparation of these catalysts were tested and analyzed where the FAME formation was the target variable to be improved. Results showed that the catalyst prepared with potassium hydroxide and calcium nitrate achieved the highest FAME formation (i.e., 95%) and outperformed the catalysts prepared with calcium nitrate and other acids even after four regeneration-reaction cycles. The best properties of an alkaline catalyst could be associated with its specific surface area and contents of potassium and calcium moieties, which were higher than those observed for acidic catalysts. Transesterification rates for biodiesel production were better estimated with the pseudo-order kinetic model, which ranged from 0.0004 to 0.038 L/mol⋅min for alkaline and acidic catalysts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.