Preliminary study of total variation noise reduction algorithm with high-energy industrial X-ray imaging system in nondestructive testing field

Abstract

Abstract Over the past years, many studies have evaluated the performance of nondestructive testing high-energy X-ray imaging methods. In these high-energy industrial X-ray imaging systems, the noise is very important when accurately assessing the nondestructive analysis of faults inside the object volume. A common way to improve the noise performance is the total variation (TV) noise reduction algorithm. Thus, the purpose of this study is to establish a high-energy industrial X-ray imaging system using 450 kVp energy and to confirm the feasibility of our designed TV noise reduction algorithm. We used an X-ray generator (including source, power supply, and cooler) and a flat panel detector made of an amorphous silicon material. In addition, we acquired the X-ray image for a battery and an air pump and then applied our designed TV noise reduction algorithm to these images. To evaluate the image performance, we used normalized noise power spectrum (NNPS), contrast to noise ratio (CNR), and coefficient of variation (COV). According to the NNPS result, the noise performance of our method was improved compared to conventional noise reduction methods. In addition, the CNR of our TV noise reduction algorithm was 1.58, 1.30, and 1.26 times greater than that achieved for the noisy image, median filter and Wiener filter, respectively. We also acquired excellent COV results for the high-energy X-ray imaging system (about 1.93 times higher than that of the noisy image). Our results suggest that a TV noise reduction algorithm can be constructed with an improved image performance in high-energy industrial X-ray imaging systems.