Preface

Abstract

Overview of the 18th International Scientific and Technical Conference Rapid Solidification Materials and Coatings A A Lozovan1 and D K Kostrin2 1Department of Materials and Materials Technology, Moscow Aviation Institute(National Research University) “MAI”, 121552, Orshanskaya, 3, Moscow, Russia 2Department of Electronic Instruments and Devices, Saint Petersburg Electrotechnical University “LETI”, 197376, Professora Popova, 5, Saint Petersburg, RussiaE-mail: alexandr.lozovan@yandex.ru . In this preface the main results of the 18th International Scientific and Technical Conference Rapid Solidification Materials and Coatings that was held on 19–20 October 2021 in Moscow, Russia are discussed.From 19 to 20 October 2021, the 18th International Scientific and Technical Conference Rapid Solidification Materials and Coatings (RSMC–2021) was held at the Moscow Aviation Institute (National Research University).Despite the difficulties associated with the coronavirus pandemic, more than 100 specialists from leading universities, the Russian Academy of Sciences and Russian enterprises, as well as scientists from Ukraine and Belarus, took part in the Conference. For the successful holding of the Conference in a pandemic, all the necessary measures were taken to ensure the implementation of sanitary rules and standards for the protection of Conference participants.At the Conference the results, which were obtained in the last year after the previous Conference, of the theoretical and experimental studies on the physics of condensed matter, low-temperature plasma physics, electronic and ion-plasma surface modification, physical methods of film deposition and other studies obtained over the last year after the previous Conference.The main objects of these studies were superficiality and superficial phenomena. Therefore, to the development and improvement of methods of surface modification and coatings deposition, as well as methods of their research and development of modern surface treatment equipment was paid the greatest attention at the Conference.During the Conference more than 70 reports were presented, which were heard in the following, traditional Conference sections (figure 1):• section 1 – Rapid solidification materials;• section 2 – Methods of coating application and research;• section 3 – Laser, electron-beam and ion-plasma methods of surface modification;• section 4 – Composite materials and permanent joints;• section 5 – Works of young scientists.The Conference was opened by Alexander Vladimirovich Bespalov, Co-Chairman of the Director of the Department of Materials Science and Materials Technology of the Moscow Aviation Institute (National Research University), who emphasized the importance of developing research in the field of physical and physicochemical methods of obtaining and processing new materials and coatings for the aerospace industry. He also noted the achievements of the Institute’s scientists in the field of laser coating and fast solidification materials.List of Organizing Committee, Program Committee, Photos are available in this pdf.