Precipitation of Pt, Pd, Rh, and Ru Nanoparticles with Non-Precious Metals from Model and Real Multicomponent Solutions.

Abstract

This article presents studies on the precipitation of Pt, Pd, Rh, and Ru nanoparticles (NPs) from model and real multicomponent solutions using sodium borohydride, ascorbic acid, sodium formate, and formic acid as reducing agents and polyvinylpyrrolidone as a stabilizing agent. As was expected, apart from PGMs, non-precious metals were coprecipitated. The influence of the addition of non-precious metal ions into the feed solution on the precipitation yield and catalytic properties of the obtained precipitates was studied. A strong reducing agent, NaBH4 precipitates Pt, Pd, Rh, Fe and Cu NPs in most cases with an efficiency greater than 80% from three- and four-component model solutions. The morphology of the PGMs nanoparticles was analyzed via SEM-EDS and TEM. The size of a single nanoparticle of each precipitated metal was not larger than 5 nm. The catalytic properties of the obtained nanomaterials were confirmed via the reaction of the reduction of 4-nitrophenol (NPh) to 4-aminophenol (NAf). Nanocatalysts containing Pt/Pd/Fe NPs obtained from a real solution (produced as a result of the leaching of spent automotive catalysts) showed high catalytic activity (86% NPh conversion after 30 min of reaction at pH 11 with 3 mg of the nanocatalyst).