Precipitation behavior of γ′ phase with a multi-model morphology in the Ni-based superalloy GH4720Li during water quenching and subsequent artificial aging and related mechanisms

Abstract

The microstructure evolution of the γ′ precipitates in GH4720Li superalloy during the heat treatment processes of water quenching and subsequent aging at temperatures of 760 °C, 800 °C, and 850 °C was investigated with particular emphasis on the variation in the morphology, size, and size distribution of the precipitates and related mechanisms. Influence of aging temperature and time on the nucleation, growth, and coarsening behavior of the bimodal dispersion of secondary and tertiary γ′ precipitates were discussed. Results showed that only spherical-shaped secondary γ′ precipitates with sizes ranging from 10 to 50 nm formed during the cooling process of quenching. During aging, the nucleation of tertiary γ′ precipitate, growth of both secondary and tertiary γ′ precipitates follow the typical solid-diffusion-assisted precipitation mechanism, while the abnormal coarsening of the secondary precipitates occurs through coalescing adjacent particles. Aging temperature has a less effect on the precipitation of the tertiary γ′ precipitate but substantially influences the coarsening of the secondary γ′ precipitates. At higher aging temperatures such as 850 °C, the abnormal coarsening of the secondary γ′ precipitates, which always takes place at 760 °C and 800 °C, are significantly suppressed. The aging time mainly influences the growth rate of the secondary γ′ but shows little effect on the evolution of the tertiary γ′ phase. Precipitates strengthen the alloy through strong coupling interaction mechanism. An optimal aging strategy heating at 850 °C for 8 h is proposed for the GH4720Li superalloy, yielding the best uniform dispersion of the precipitates, maximum hardness of the sample, and being considered time and energy-saving.