Pre-exfoliated nanoclay through two consecutive reaction systems: Silane functionalization followed by grafting of amino acid monomers

Abstract

This work presents a novel way to produce a thermally stable nanoclay with an increased interlayer space, which are the essential requirements in fabricating clay-polymer nanocomposites. Sodium montmorillonite (Na-Mt) was functionalized through two separate, consecutive reaction systems. Functionalization with an aminosilane was first performed, in order to produce reactive groups at the silicate nanolayers. In the second step, amino acid monomers were employed for a further reaction with silane-modified nanoclay. X-ray diffraction results demonstrated an increased d001-value (24Å) using 10mmol γ-aminobutyric acid. The 001 reflection peak disappeared when 5mmol ω-aminoundecanoic acid/g Mt was used as the second type of amino acid. Transmission electron microscopy images of modified Mt with 10mmol ω-aminoundecanoic acid exhibited a well separated or exfoliated structure of nanolayers. Thermogravimetric measurements indicated a trend of increasing thermal stability of the modified nanoclays (350°C to 400°C) with increasing amounts of initial ω-aminoundecanoic acid. Based on these results, optimizing the modifiers and synthesis conditions can control the properties of modified nanoclay. Tensile modulus and strain at break of HDPE/2 mass% modified Mt showed 10% and 14% enhancements, respectively, due to the increased d001-value of the nanofiller, which results in greater filler-polymer interaction.