Abstract
폴리프로필렌(polypropylene, PP)/talc 컴파운드를 talc의 조성을 20wt%로 하여 마스터뱃취(master-batch, MB)와 사출기를 이용한 직접 제조법으로 각각 제조하였다. MB는 talc 함량을 50wt%로 하여 소형 혼합기(mini compounder)로 <TEX>$200^{\circ}C$</TEX>에서 제조하였다. SEM-EDS를 이용하여 PP/talc 컴파운드의 talc 분산정도를 평가하였다. MB를 이용하여 제조한 컴파운드의 talc 분산성이 우수하게 나타났다. PP/talc 컴파운드의 유변학적 특성을 동적유변측정기를 이용하여 측정하였다. MB를 이용한 MB-PP 컴파운드가 직접 제조한 컴파운드보다 shear thinning과 탄성특성이 증가하였다. G'-G" plot의 기울기 변화로부터 talc 분산성 정도를 확인하였고, 탄성특성 증가를 확인하기 위해 Van Gurp-Palmen 분석을 이용하였다. Polypropylene (PP)/talc compounds with talc content of 20wt% were fabricated by master-batch (MB) and direct compounding method using injection molding. The MB was prepared by mini compounder at <TEX>$200^{\circ}C$</TEX> and the content of talc was 50wt%. The talc dispersion of the PP/talc compound was investigated by SEM-EDS. The talc was well dispersed within PP matrix in case of the MB-PP compound using MB. The rheological properties of the PP/talc compounds were measured by dynamic Rheometer. The MB-PP compound indicates higher shear thinning and elastic property than direct compound. The disperion of talc was certified by G'-G" plot, and Van Gurp-Palmen analysis was applied in order to certify an increase in elasticity.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Korea Academia-Industrial cooperation Society
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
