Abstract
Electrocardiogram (ECG) is a critical biomedical signal and plays an imperative role in diagnosing cardiovascular disorders. During ECG data acquisition in clinical environment, noise is frequently present. Various noises such as powerline interference (PLI) and baseline wandering (BLW) distort the ECG signal which may lead to incorrect interpretation. Consequently, substantial emphasis has been dedicated to ECG denoising for reliable diagnosis and analysis. In this study, a novel hybrid ECG denoising method based on variational mode decomposition (VMD) and the empirical wavelet transform (EWT) is presented. For effective denoising using the VMD and EWT approach, the noisy ECG signal is decomposed within narrow-band variational mode functions (VMFs). The aim is to remove noise from these narrow-band VMFs. In current approach, the centre frequency of each VMF was computed and utilized to design an adaptive wavelet filter bank using EWT. This leads to effective removal of noise components from the signal. The proposed approach was applied to ECG signals obtained from the MIT-BIH Arrhythmia database. To evaluate the denoising performance, noise sources from the MIT-BIH Noise Stress Test Database (NSTDB) are used for simulation. The assessment of denoising performance in based on two key metrics: the percentage-root-mean-square difference (PRD) and the signal-to-noise ratio (SNR). The findings of the simulation experiment demonstrate that the suggested method has lower percentage root mean square difference and higher signal-to-noise ratio as compared to existing state of the art denoising methods. An average output SNR of 24.03 was achieved, along with a 5% reduction in PRD.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Computer Methods in Biomechanics and Biomedical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.