Power quality improvement using rabbit optimization FOPID controlled photovoltaic- battery powered hybrid power filter

Abstract

This paper presents the tuning of a fractional proportional controller (FOPI) using artificial rabbit optimization for the control of photovoltaic (PV) and battery power series active power filters along with a shunt passive filter which is known as a hybrid power filter. The PV power generation is combined into a series active filter to alleviate the problem of voltage sag and swell in the power system and also supply real power to the grid. Generally, the proportional controller is used to control the series active filter, but this is a linear controller and is not able to control the non-linear power system effectively. This problem is effectively controlled by non-linear control, i.e., a fractional-order proportional integral controller. Another problem in FOPI is finding the optimal value for proportional gain, integral gain, and fractional order. There are no standard rules for finding these values. This will make system design more complex. In this paper, artificial rabbit optimization is used to simplify the system design by finding optimal values of the FOPI controller for the series active filter and enhance the overall performance of the system. The MATLAB 2020b/Simulink environment is utilized to assess the recommended controller’s performance. According to the experimental findings, the suggested system has a total harmonic distortion (THD) value for load voltage of 0.10 % and a total harmonic distortion value for grid current of 1.87 %. The proposed artificial-rabbit optimized FOIPI controller effectively controls the system against voltage sag, swell, and non-linear loads and also obeys IEEE power quality standards.