Abstract
A dielectric barrier discharge (DBD) in atmospheric pressure air was excited by a high-voltage pulse power supply. Capacitors with different capacitance were connected in the discharge circuit and their effects on discharge power calculation were evaluated. The average power deposited into the discharge were calculated by three different methods: 1) Lissajous figure; 2) product of voltage and current; and 3) watt-hour meter. Further studies showed that the capacitor with 10 nF was suitable for power calculation. At applied voltage of 9 kV, discharge power calculated by three methods were similar (around 25-27 W). However, with the increase of applied voltage, the discharge power obtained by product of voltage and current was far beyond the real value. Lissajous method has proven more appreciable for discharge power calculation in a pulsed plasma at high voltage. This study provides a practical guide for power calculation in a pulsed-driven DBD system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have