Abstract
Liquid phase crystallization of silicon (LPC-Si) on glass is a promising method to produce high quality multi-crystalline Si films with macroscopic grains. In this study, we report on recent improvements of our interdigitated back-contact silicon heterojunction contact system (IBC-SHJ), which enabled open circuit voltages as high as 661mV and efficiencies up to 14.2% using a 13µm thin n-type LPC-Si absorbers on glass. The influence of the BSF width on the cell performance is investigated both experimentally and numerically. We combine 1D optical simulations using GenPro4 and 2D electrical simulations using Sentaurus™ TCAD to determine the optical and electrical loss mechanisms in order to estimate the potential of our current LPC-Si absorbers. The simulations reveal an effective minority carrier diffusion length of 26µm and further demonstrate that a doping concentration of 4 × 1016cm−3 and a back surface field width of 60µm are optimum values to further increase cell efficiencies.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
