Abstract
ABSTRACTFlexible, lightweight thin film (TF) photovoltaic (PV) modules offer a unique opportunity for integration into non‐planar surfaces unable to support heavy weights. While such applications increase the potential for PV in urban areas, the reliability implications are yet to be investigated. Here, prototypes of corrugated rooftiles with integrated Cu (In,Ga)Se2 (CIGS) modules were investigated after 3 years of outdoor operation. Their performance before and after the outdoor exposure was compared and defects were localized. An unpackaging method was developed, allowing access to the solar cells for more detailed characterization of present defects without causing additional damage or changes to existing defects. To our knowledge, this was the first time such an unpackaging method was successfully applied to flexible TF PV modules. The relative efficiency loss ranged from 17% to 43%, mostly due to short‐circuit current (ISC) loss and series resistance (RS) increase. The predominant cause of the RS increase was the delamination at the interconnects, ascribed to thermomechanical stresses caused by outdoor temperature fluctuations. The ISC loss was mainly caused by localized delamination of CIGS from the molybdenum (Mo) back‐contact. The occurrence of such delaminated areas pointed to presence of high local stresses during outdoor operation, possibly due to thermal fluctuations, applied deformation and/or mechanical impact. Two other types of delamination defects were found with no observable impact on performance. These results show the necessity for further optimization in the material choice and processing of TF flexible modules, to avoid mechanical stress related failures upon integration into curved surfaces.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Progress in Photovoltaics: Research and Applications
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
