Abstract
Abstract A post-drill pore pressure and fracture gradient analyses were conducted on a field in the Tano Basin of Ghana with the primary objective of predicting as accurately as possible the pore pressure, fracture pressure and the overburden pressure from the well logs data of two wells. The wells were drilled offshore in water depths of about 95.4 m and 124.4 m. Eaton's method coupled with depth-dependent Normal Compaction Trendlines (NCT) and Mathews and Kelly method were used in determining the pore pressure and fracture gradient. The results indicate that average pore pressure gradient, fracture pressure gradient and overburden pressure gradient for the first well are 1.423 psi/m (8.34ppg), 3.514psi/m (20.6ppg) and 4.299psi/m (25.2ppg) respectively whiles values for the second well are 1.423psi/m (8.34ppg), 3.85psi/m (21ppg) and 4.299psi/m (25.2ppg) respectively. These values were predicted to be required to maintain the stability of the wells using accurate mud weight.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
