Abstract
In the frame of developmental assessment and code validation, a post-test calculation of the test QUENCH-07 was performed with ATHLET-CD. The system code ATHLET-CD is being developed for best-estimate simulation of accidents with core degradation and for evaluation of accident management procedures. It applies the detailed models of the thermal-hydraulic code ATHLET in an efficient coupling with dedicated models for core degradation and fission products behaviour. The first step of the work was the simulation of the test QUENCH-07 applying the modelling options recommended in the code User's Manual (reference calculation). The global results of this calculation showed a good agreement with the measured data. This calculation was complemented by a sensitivity analysis in order to investigate the influence of a combined variation of code input parameters on the simulation of the main phenomena observed experimentally. Results of this sensitivity analysis indicate that the main experimental measurements lay within the uncertainty range of the corresponding calculated values. Among the main contributors to the uncertainty of code results are the heat transfer coefficient due to forced convection to superheated steam–argon mixture, the thermal conductivity of the shroud isolation and the external heater rod resistance. Uncertainties on modelling of B 4C oxidation do not affect significantly the total calculated hydrogen release rates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
