Positive Switching Impulse Discharge Performance and Voltage Correction of Rod-Plane Air Gap Based on Tests at High-Altitude Sites

Abstract

The Qinghai-Tibet Railway is the highest railway in the world. Up to now, there were no test and service data for the external insulation of the power-supply project of the railway system above 4000 m above sea level (a.s.l.). The ldquogrdquo parameter method recommended by IEC Publication 60.1 (1989) has a limited applicable range. Therefore, based on the former tests carried on the artificial climate chamber (ACC), in this paper, a series of test investigations is conducted on the positive switching impulse (PSI) discharge performance of rod-plane air gaps with gap spacing of 0.25 to 3.0 m at the six high-altitude sites along the Qinghai-Tibet Railway with altitudes of 2820 to 5050 m. With analyses of the mathematical optimization method on the test results, the new correction method of discharge voltage is proposed. They are also checked and compared with the test results obtained from the simulation tests carried out in the ACC. It is indicated that the 50% PSI discharge voltage U 50 of the air gap at high altitude is a power function of gap spacing d, also a power function of relative pressure of dry air and absolute humidity. The influence law of atmospheric parameters on U 50 obtained at high-altitude sites is the same as that obtained in the ACC. U 50 . obtained in the ACC, is about 8.15% higher than that obtained at high-altitude sites due to the influence of nonsimulated factors, such as ultraviolet ray and cosmic radiation. The ldquogrdquo parameter method is not applicable to the regions with an altitude above 2800 m.