Pore-scale flooding experiments reveal the thermally regulated flow fields of the curdlan solution

Abstract

Polymers can enhance oil recovery depending on viscoelasticity. In a field, during polymer flow through porous strata, continuous shear forces result in severe viscosity loss. However, polymers with great shear resistance result in limited migration distance. One solution to the above dilemma is to regulate viscosity, which enables a polymer to migrate long distances through pores with low viscosity and subsequently maintain high viscosity in deep reservoirs. The viscosity of curdlan can be regulated by changing temperature. By curdlan, we mean a biopolymer that shows applications in food industry. However, regarding oil reservoirs, it is unclear whether curdlan viscosity can be effectively regulated in pores. To reveal the feasibility of curdlan viscosity regulation to enhance oil recovery, flooding experiments combined with micro-particle image velocimetry were conducted in a two-dimensional pore network to investigate flow fields of curdlan solutions (0.25%, 0.5%, 1%, and 2%, w/v) at different temperatures (40, 65, and 85 °C). As a result, at 40 °C, curdlan solution (0.25%) easily migrated with low viscosity loss and low adsorption [88.3% original throat diameter (OTD)], and the mobility of curdlan was higher than hydrolyzed polyacrylamide. After heating (65 °C), the viscoelasticity, adsorption (55.1% OTD), and flow resistance (injection pressure, 2.2–8.8 kPa) of curdlan increased, and the greater adsorption capacity of curdlan than xanthan gum led to a more homogeneous flow field [average velocity ratio (Rm), from 2.6 to 1.1]. Since a homogeneous flow field indicated better sweep efficiency, curdlan regulated by temperature could achieve both long-distance migration and improved sweep efficiency in deep strata. These results suggested that viscosity regulation by curdlan could potentially improve oil recovery in water-flooded reservoirs.