Abstract
AbstractCopper deposition into ordered macroporous silicon prepared in p‐type substrates was investigated by immersion plating and electrochemical deposition in an aqueous solution containing Cu2+ ions. When the sample was immersed in 0.1 M CuSO4 solution at the open circuit potential, Cu crystallites are clearly observed at the top surface and inside the pores. The deposition of Cu oxidizes the substrate simultaneously to SiO2. On the other hand, the potentiostatic deposition in the dark revealed that Cu deposits preferentially at the pore bottom and propagates towards the top surface. Furthermore, when the substrate was illuminated under cathodic potential, the Cu deposition was enhanced mainly at the top‐surface and around the pore walls. The different deposition behavior was compared and discussed. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.